CC0603KRX7R8BB224 Datasheet Summary

Part Number

CC0603KRX7R8BB224

Overview

This document provides detailed specifications and test methods for the CC0603KRX7R8BB224, a surface-mount ceramic multilayer capacitor designed for general-purpose and high-capacitance applications.

Specifications

Basic Information

• Part Number: CC0603KRX7R8BB224
• Series: X7R
• Package Code: 0603
• Capacitance: 220 nF
• Rated Voltage: 25 V
• Tolerance: ±10%
• Temperature Characteristic: X7R (±15% over -55°C to +125°C)
• Termination: Nickel-barrier end termination
• Compliance: RoHS compliant, Halogen Free compliant

Dimensions

• Length (L): 1.6 mm ± 0.1 mm
• Width (W): 0.8 mm ± 0.1 mm
• Height (T): 0.8 mm ± 0.1 mm

Ordering Information

• Global Part Number: CC0603KRX7R8BB224
• Ordering Code:Size: 0603Tolerance: K (±10%)Packing Style: B (Blister taping reel, 7 inch)Rated Voltage: 8 (25 V)Capacitance Value: 224 (220 nF)

Electrical Characteristics

• Capacitance Range: 220 nF
• Dissipation Factor (D.F.): ≤ 5% at 1 kHz, 1 Vrms, 20°C
• Insulation Resistance (I.R.): ≥ 10 GΩ or Rins × Cr ≥ 500Ω·F at 25 V DC for 1 minute
• Temperature Characteristic: X7R: ±15% over -55°C to +125°C

Test Methods

• Mounting: IEC 60384-21/22
• Visual Inspection and Dimension Check: Any applicable method using ×10 magnification
• Capacitance Measurement: At 1 kHz, 1 Vrms, 20°C
• Dissipation Factor (D.F.): At 1 kHz, 1 Vrms, 20°C
• Insulation Resistance: At rated voltage (DC) for 1 minute
• Temperature Characteristic: Measured at specified temperatures with no bias or with applied voltage

Mechanical and Environmental Tests

• Adhesion: Force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate
• Bending Strength: No visible damage after bending 1 mm at a rate of 1 mm/s, radius jig 5 mm
• Resistance to Soldering Heat: Preconditioning at 150 +0/–10°C for 1 hour, then keep for 24 ±1 hours at room temperature
• Solderability: Preheated to a temperature of 80°C to 140°C and maintained for 30 seconds to 60 seconds. Solder bath temperature: 260 ±5°C, Dipping time: 10 ±0.5 seconds
• Rapid Change of Temperature: 5 cycles with 30 minutes at lower category temperature and 30 minutes at upper category temperature
• Damp Heat with Ur Load: 500 ±12 hours at 40 ±2°C; 90 to 95% R.H., 1.0 Ur applied

Packaging

• Reel Size: 7 inch (Ø180 mm)
• Quantity per Reel: 2,500 pieces

Applications

This capacitor is suitable for general-purpose and high-capacitance applications, including:

• PCs, Hard disk, Game PCs
• DVDs, Video cameras
• Mobile phones
• Data processing

Caution

• Ensure the operating conditions do not exceed the specified ratings.
• Evaluate the capacitor's performance in the actual system before finalizing the design.
• Follow the recommended soldering and mounting guidelines to ensure reliability and performance.