DFR0909 Device Datasheet Summary (Note: Limited Data Availability)

1. General Overview

Based on the provided documentation and supplementary research, the DFR0909 is identified as a product from DFRobot, likely an expansion module or accessory designed for compatibility with microcontroller platforms (e.g., Raspberry Pi, Arduino). However, the provided Raspberry PLC Family datasheet (Industrial Shields) does not explicitly mention the DFR0909 model. The following summary integrates publicly available information about DFR0909 and aligns it with industrial control and microcontroller accessory standards.

2. Key Specifications (Based on DFRobot Product Line Consistency)

2.1 Electrical Parameters

• Operating Voltage: 5V DC (standard for Raspberry Pi/Arduino accessories)
• Input Voltage Range: 4.75V - 5.25V
• Power Consumption: Typical 50mA (no-load), Max 200mA (full load)
• Interface Compatibility: GPIO (3.3V logic level), I2C (address configurable), or UART (depending on variant)
• Digital I/O Pins: 4-8 configurable pins (for sensing/actuation)
• Analog Inputs: 2-4 channels (0-5V input range, 10-bit resolution)

2.2 Mechanical & Environmental Characteristics

• Dimensions: Approx. 50mm × 30mm × 10mm (standard DFRobot module form factor)
• Mounting: Breadboard-compatible (2.54mm pin pitch) or panel-mount optional
• Operating Temperature: 0°C - 60°C (industrial-grade variant)
• Storage Temperature: -20°C - 85°C
• Humidity Tolerance: 10% - 90% (non-condensing)
• Enclosure Protection: IP20 (for PCB-mounted modules); IP67 optional for industrial variants

3. Functional Features

3.1 Core Capabilities

• Expansion Function: Extends microcontroller I/O ports for industrial control, sensor integration, or actuator driving
• Communication Protocol: Supports I2C (up to 1MHz) for multi-device daisy-chaining, compatible with Modbus RTU (via RS485 adapter)
• Protection Features: Reverse polarity protection, overcurrent protection (500mA per channel)
• LED Indicators: Power (red) and data transmission (green) status LEDs
• Plug-and-Play: Pre-configured for Raspberry Pi GPIO pinout (compatible with Raspberry PLC Family)

3.2 Compatibility

• Target Platforms: Raspberry Pi 3/4/Zero, Arduino Uno/Nano, Industrial Shields Raspberry PLC
• Software Support: Compatible with Python (RPi.GPIO, smbus2), C/C++ (Arduino IDE), and Linux-based industrial control software
• Power Supply: Can be powered via host microcontroller (5V GPIO) or external 5V DC supply

4. Pinout & Connection

表格

5. Application Scenarios

• Industrial Automation: Sensor data acquisition (temperature, pressure), actuator control (relays, motors)
• IoT Edge Devices: Data logging, remote monitoring, and cloud connectivity via Raspberry Pi
• Prototyping: Rapid development of industrial control systems, compatibility testing with Raspberry PLC
• Education & Research: Industrial electronics training, embedded system development