GRM216R71H102KA01D Technical Specification Summary

Part Number

GRM216R71H102KA01D

Overview

This document provides detailed specifications for the GRM216R71H102KA01D, a chip monolithic ceramic capacitor designed for general electronic equipment. The specifications are accurate as of March 1, 2016, and are subject to change without notice. It is recommended to consult the approval sheet before ordering and to carefully review the ratings and cautions provided.

Part Number Breakdown

• GRM: Indicates the manufacturer's series code.
• 216: Represents the size code (0805).
• R71H: Denotes the temperature characteristic (X7R, EIA standard).
• 102K: Specifies the nominal capacitance (1000 pF) and tolerance (±10%).
• A01D: Indicates the packaging code and other specific attributes.

Dimensions

• Length (L): 2.0 mm ± 0.1 mm
• Width (W): 1.25 mm ± 0.1 mm
• Height (T): 0.6 mm ± 0.1 mm

Rated Values

• Rated Voltage: DC 50 V
• Temperature Range: -55°C to +125°C (reference temperature: 25°C)
• Capacitance Tolerance: ±10%
• Temperature Coefficient: X7R (EIA standard)

Packaging

• Packaging Unit:D: f180 mm reel, paper, W8P4, 4000 pcs./reelJ: f330 mm reel, paper, W8P4, 10000 pcs./reel

Electrical Characteristics

• Insulation Resistance (I.R.):For capacitance ≤ 0.047 µF: More than 10,000 MΩFor capacitance > 0.047 µF: More than 500 Ω·F
• Capacitance Measurement:Temperature Compensating Type: Measured at room temperatureHigh Dielectric Constant Type: Measured at room temperature
• Q or Dissipation Factor (D.F.):For capacitance ≥ 30 pF: Q ≥ 1000 (W.V.: 100 Vdc)For capacitance < 30 pF: Q ≥ 400 + 20C (W.V.: 100 Vdc)

Environmental and Mechanical Characteristics

• Vibration Test: No defects or abnormalities after 2 hours of vibration (10Hz to 55Hz to 10Hz, total amplitude 1.5mm).
• Substrate Bending Test: Capacitance change within ±5% or ±0.5pF (whichever is larger).
• Solderability: 95% of the terminations should be soldered evenly and continuously.
• Resistance to Soldering Heat: Capacitance change within ±2.5% or ±0.25pF (whichever is larger).

Storage and Handling

• Storage Conditions: Room temperature of +5°C to +40°C and relative humidity of 20% to 70%.
• Handling: Avoid excessive mechanical stress, vibration, and thermal shock. Do not reuse capacitors removed from equipment.

Applications

This capacitor is suitable for general electronic equipment. For applications requiring high reliability, such as aircraft, aerospace, medical, or transportation equipment, contact the manufacturer for specific recommendations.

Caution

• Do not exceed the rated voltage or apply abnormal voltages (surge voltage, static electricity, pulse voltage, etc.).
• Confirm the solderability of capacitors that have been in long-term storage.
• Evaluate the capacitor in the actual system to ensure it meets the required performance and specification values.