Product Specification Summary for GRM31CR61A107MEA8L

Basic Information

• Supplier: Murata Manufacturing Co., Ltd.
• Murata Part Number: GRM31CR61A107MEA8L
• Product: Chip Multilayer Ceramic Capacitor
• Description: 3216M (1206), X5R (EIA), 100µF, DC 10V

Part Number Breakdown

• Series: GRM31
• Dimension (L×W): 3216M (1206)
• Temperature Characteristics: X5R (EIA)
• Rated Voltage: DC 10V
• Capacitance: 100µF
• Capacitance Tolerance: ±20%
• Operating Temperature Range: -55 to 85°C
• Package: Plastic Tape

Type & Dimensions

• Length (L): 3.2 ± 0.3 mm
• Width (W): 1.6 ± 0.3 mm
• Height (H): 1.6 ± 0.3 mm

Rated Value

• Rated Voltage: DC 10V
• Nominal Capacitance: 100µF
• Capacitance Tolerance: ±20%
• Temperature Range: -55 to 85°C
• Temperature Characteristics: X5R (EIA)

Packaging

• Package: Plastic Tape
• Reel Size:φ330mm Reel: 6000 pcs./Reel (K Code)φ180mm Reel: 2000 pcs./Reel (L Code)

Specifications and Test Methods

Adhesive Strength of Termination

• Specification: No removal of the terminations.
• Mounting Method: Solder the capacitor on the test substrate.
• Applied Force: 10N
• Holding Time: 10±1 seconds
• Applied Direction: In parallel with the test substrate and vertical with the capacitor side.

Temperature Characteristics of Capacitance

• Specification: Shown in Rated Value.
• Measurement Voltage: Less than 1.0Vrms (Refer to the individual data sheet).
• Pre-treatment: Heat treatment at 150±10°C for 1 hour, then let sit for 24±2 hours at room temperature.
• Measurement Temperature: Room Temperature
• Measurement Frequency: 120±24Hz
• Measurement Voltage: 0.5±0.1Vrms

Dissipation Factor (D.F.)

• Specification: DF ≤ 0.15
• Measurement Temperature: Room Temperature
• Measurement Frequency: 120±24Hz
• Measurement Voltage: 0.5±0.1Vrms

Insulation Resistance (I.R.)

• Specification: More than 50Ω・F
• Measurement Temperature: Room Temperature
• Measurement Point: Between the terminations
• Measurement Voltage: Rated Voltage
• Charging Time: 1 minute
• Charge/Discharge Current: 50mA max.

Voltage Proof

• Specification: No defects or abnormalities.
• Measurement Point: Between the terminations
• Test Voltage: 250% of the rated voltage
• Applied Time: 1 to 5 seconds
• Charge/Discharge Current: 50mA max.

Appearance

• Specification: No defects or abnormalities.
• Test Method: Visual inspection.

Dimension

• Specification: Shown in Dimension.
• Test Method: Using Measuring instrument of dimension.

Environmental Performance

High Temperature High Humidity (Steady)

• Specification: No defects or abnormalities.
• Mounting Method: Solder the capacitor on the test substrate.
• Test Temperature: 40±2°C
• Test Humidity: 90%RH to 95%RH
• Test Time: 500±12 hours
• Pre-treatment: Heat treatment at 150±10°C for 1 hour, then let sit for 24±2 hours at room temperature.
• Post-treatment: Heat treatment at 150±10°C for 1 hour, then let sit for 24±2 hours at room temperature.

Durability

• Specification: No defects or abnormalities.
• Mounting Method: Solder the capacitor on the test substrate.
• Test Voltage: 100% of the rated voltage
• Test Temperature: 40±2°C
• Test Humidity: 90%RH to 95%RH
• Test Time: 1000±12 hours
• Pre-treatment: Heat treatment at 150±10°C for 1 hour, then let sit for 24±2 hours at room temperature.
• Post-treatment: Heat treatment at 150±10°C for 1 hour, then let sit for 24±2 hours at room temperature.

Storage and Operation Condition

Storage

• Temperature: +5°C to +40°C
• Relative Humidity: 20% to 70%
• Storage Duration: Use within 6 months for optimal performance. Check packaging and solderability after 6 months. Check solderability after 1 year.

Operation

• Temperature Range: -55 to 85°C
• Avoid: Direct sunlight, corrosive gases (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas), high humidity conditions.

Caution

Limitation of Applications

• Aerospace/Aviation equipment
• Automotive of Transportation equipment (vehicles, trains, ships, etc.)
• Military equipment
• Atomic energy-related equipment
• Undersea equipment
• Medical equipment
• Disaster prevention/crime prevention equipment
• Power plant control equipment
• Traffic signal equipment
• Data-processing equipment
• Applications with similar complexity and/or reliability requirements

Handling

• Do not touch directly: To avoid electric shock.
• Do not expose to conductive objects or liquids: To prevent short circuits.
• Check operating environment: Ensure it meets specified conditions.

Notes

• Product Evaluation: Ensure the product is evaluated for your specific application.
• Specification Compliance: Do not use the product outside of the specified conditions.
• Specification Changes: Specifications are subject to change without notice. Always consult the latest approval sheet before ordering.