GRM31CR61H106KA12L Technical Specification Summary

Part Number

GRM31CR61H106KA12L

Overview

This document provides detailed specifications for the GRM31CR61H106KA12L, a chip monolithic ceramic capacitor designed for general electronic equipment. The specifications are accurate as of March 7, 2016, and are subject to change without notice. It is recommended to consult the approval sheet before ordering and to carefully review the ratings and cautions provided.

Part Number Breakdown

• GRM: Indicates the manufacturer's series code.
• 31C: Represents the size code (1206).
• R61H: Denotes the temperature characteristic (X5R, EIA standard).
• 106K: Specifies the nominal capacitance (10 µF) and tolerance (±10%).
• A12L: Indicates the packaging code and other specific attributes.

Dimensions

• Length (L): 3.2 mm ± 0.2 mm
• Width (W): 1.6 mm ± 0.2 mm
• Height (T): 1.6 mm ± 0.2 mm

Rated Values

• Rated Voltage: DC 50 V
• Temperature Range: -55°C to +85°C (reference temperature: 25°C)
• Capacitance Tolerance: ±10%
• Temperature Coefficient: X5R (EIA standard)

Packaging

• Packaging Unit:L: f180 mm reel, embossed, W8P4, 2000 pcs./reelK: f330 mm reel, embossed, W8P4, 6000 pcs./reel

Electrical Characteristics

• Insulation Resistance (I.R.): More than 50Ω ∙ F
• Capacitance Measurement: Measured at room temperature
• Dissipation Factor (D.F.): Maximum 0.1

Environmental and Mechanical Characteristics

• Vibration Test: No defects or abnormalities after 2 hours of vibration (10Hz to 55Hz to 10Hz, total amplitude 1.5mm).
• Substrate Bending Test: Capacitance change within ±10%.
• Solderability: 95% of the terminations should be soldered evenly and continuously.
• Resistance to Soldering Heat: Capacitance change within ±7.5%.

Storage and Handling

• Storage Conditions: Room temperature of +5°C to +40°C and relative humidity of 20% to 70%.
• Handling: Avoid excessive mechanical stress, vibration, and thermal shock. Do not reuse capacitors removed from equipment.

Applications

This capacitor is suitable for general electronic equipment. For applications requiring high reliability, such as aircraft, aerospace, medical, or transportation equipment, contact the manufacturer for specific recommendations.

Caution

• Do not exceed the rated voltage or apply abnormal voltages (surge voltage, static electricity, pulse voltage, etc.).
• Confirm the solderability of capacitors that have been in long-term storage.
• Evaluate the capacitor in the actual system to ensure it meets the required performance and specification values.