APAN3124 Datasheet Summary

Ordering Information

• Type: PA-N Series
• Contact Arrangement: 1 Form A (Bifurcated)
• Nominal Coil Voltage: 24 V DC
• Part Number: APAN3124
• Standard Packing: Tube (25 pcs.), Case (1,000 pcs.)
• Terminal Sockets: Available

Features

1. High Density Mounting: Dimensions: 5mm(W) × 20mm(L) × 12.5mm(H)
2. Low Operating Power: Nominal operating power: 110mW
3. Complies with IEC61010 Reinforced Insulation Standards
4. Long Insulation Distance:Clearance: 5.29mm (0.208 inch)Creepage Distance: 5.35mm (0.211 inch)3,000 V Breakdown Voltage and 6,000V Surge Breakdown Voltage
5. Complies with Standard for Hazardous Location (ANSI/ISA 12.12.01)

Typical Applications

1. Output Relays for Programmable Controllers and Temperature Controllers
2. Industrial Equipment, Office Equipment
3. Measuring Devices and Test Equipment

Rating

Coil Data

• Nominal Coil Voltage: 24 V DC
• Pick-up Voltage (at 20°C): 70%V or less of nominal voltage
• Drop-out Voltage (at 20°C): 5%V or more of nominal voltage
• Nominal Operating Current [±10%]: 4.6 mA
• Coil Resistance [±10%]: 5,236 Ω
• Nominal Operating Power: 110 mW
• Max. Applied Voltage: 120%V of nominal voltage

Characteristics

• Contact Arrangement: 1 Form A (Bifurcated)
• Contact Resistance (Initial): Max. 30 mΩ (By voltage drop 6 V DC 1A)
• Contact Material: AgNi type + Au
• Nominal Switching Capacity (Resistive Load): 5 A 250 V AC, 5 A 30 V DC
• Max. Switching Power (Resistive Load): 1,250 VA, 150 W
• Max. Switching Voltage: 250 V (AC), 110 V (DC) (0.4 A)
• Max. Switching Current: 5 A (AC, DC)
• Min. Switching Capacity (Reference Value): 1 mA 5 V DC

Electrical Characteristics

• Insulation Resistance (Initial): Min. 1,000MΩ (at 500V DC)
• Breakdown Voltage (Initial):Between Open Contacts: 1,000 Vrms for 1min. (Detection current: 10mA)Between Contact and Coil: 3,000 Vrms for 1min. (Detection current: 10mA)
• Surge Breakdown Voltage (Initial): 6,000 V (Between contacts and coil)
• Operate Time (at Nominal Voltage): Max. 10 ms (excluding contact bounce time)
• Release Time (at Nominal Voltage): Max. 5 ms (excluding contact bounce time and without diode)

Mechanical Characteristics

• Shock Resistance:Functional: Min. 147 m/s² (Half-wave pulse of sine wave: 11 ms; detection time: 10μs)Destructive: Min. 980 m/s² (Half-wave pulse of sine wave: 6 ms)
• Vibration Resistance:Functional: 10 to 55 Hz at double amplitude of 2.5 mm (Detection time: 10μs)Destructive: 10 to 55 Hz at double amplitude of 3.5 mm

Expected Life

• Mechanical: Min. 2×10⁷ (at 180 times/min.)
• Electrical:Min. 10⁵ (3 A 250 V AC, 30 V DC, resistive load)Min. 5×10⁴ (5 A 250 V AC, 30 V DC, resistive load) (at 20 times/min.)

Conditions for Operation, Transport and Storage

• Ambient Temperature: –40°C to 90°C (–40°F to 194°F)
• Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
• Max. Operating Speed: 20 times/min. (at nominal switching capacity)

Unit Weight

• Approx. 3 g (0.15 oz)

Reference Data

Dimensions (mm/inch)

• External Dimensions: General tolerance: ±0.3 mm (±0.012 inch)
• PC Board Pattern (Bottom View): Tolerance: ±0.1 mm (±0.004 inch)

Safety Standards

• Insulation Distance (between contact and coil):UL/C-UL: Clearance distance: 5.29 mm (0.208 inch), Creepage distance: 5.35 mm (0.211 inch)TÜV: Clearance distance: 5.29 mm (0.208 inch), Creepage distance: 5.35 mm (0.211 inch)

Notes

1. For cautions for use, please read “GENERAL APPLICATION GUIDELINES”
2. If it includes ripple, the ripple factor should be less than 5%
3. Specification values for pick-up and drop-out voltages are for the relay mounting with its terminals below
4. When mounting the relays within 1 mm (0.039 inch):Mount the relays in the same directionCoil terminals (Terminal No. 1 & 2) polarity should be arranged in the same direction