74AUP3G3404DC Model Information

Overview

The 74AUP3G3404DC is a low-power dual buffer and single inverter from Nexperia. It is designed for applications requiring efficient signal buffering and inversion with minimal power consumption. This model is housed in a VSSOP8 package, which is a plastic very thin shrink small outline package with 8 leads and a body width of 2.3 mm.

Ordering Information

• Type Number: 74AUP3G3404DC
• Temperature Range: -40°C to +125°C
• Package: VSSOP8
• Description: Plastic very thin shrink small outline package; 8 leads; SOT765-1 body width 2.3 mm

Marking

• Marking Code: aZ
• Pin 1 Indicator: Located on the lower left corner of the device, below the marking

Functional Diagram

The functional diagram of the 74AUP3G3404DC includes logic symbols and IEC logic symbols, illustrating the dual buffer and single inverter functions.

Pinning Information

Pinning

• Package: VSSOP8 (SOT765-1)
• Pin Configuration:1A: Pin 12A: Pin 33A: Pin 61Y: Pin 72Y: Pin 53Y: Pin 2GND: Pin 4Vcc: Pin 8

Pin Description

• 1A, 2A, 3A (Pins 1, 3, 6): Data input
• 1Y, 2Y, 3Y (Pins 7, 5, 2): Data output
• GND (Pin 4): Ground (0 V)
• Vcc (Pin 8): Supply voltage

Functional Description

The 74AUP3G3404DC provides the following functions:

• Dual Buffer:Input: 1A, 3AOutput: 1Y, 3YLogic: Input LOW (L) results in Output LOW (L); Input HIGH (H) results in Output HIGH (H)
• Single Inverter:Input: 2AOutput: 2YLogic: Input LOW (L) results in Output HIGH (H); Input HIGH (H) results in Output LOW (L)

Limiting Values

• Supply Voltage (Vcc): -0.5 V to +4.6 V
• Input Clamping Current (IK): -50 mA (for v < 0 V)
• Input Voltage (VI): -0.5 V to +4.6 V
• Output Clamping Current (IOK): -50 mA (for Vo < 0 V)
• Output Voltage (Vo): -0.5 V to +4.6 V (Active mode and Power-down mode)
• Output Current (IO): ±20 mA (for Vo = 0 V to Vcc)
• Supply Current (Icc): 50 mA
• Ground Current (IGND): -50 mA
• Storage Temperature (Tstg): -65°C to +150°C

Recommended Operating Conditions

• Supply Voltage (Vcc): 0.8 V to 3.6 V
• Input Voltage (VI): 0 V to 3.6 V
• Output Voltage (Vo): 0 V to Vcc (Active mode); 0 V to 3.6 V (Power-down mode)
• Ambient Temperature (Tamb): -40°C to +125°C
• Input Transition Rise and Fall Rate (Δt/ΔV): 200 ns/V

Static Characteristics

• High-Level Input Voltage (VIH): Varies with Vcc (0.70Vcc to 2.0 V)
• Low-Level Input Voltage (VIL): Varies with Vcc (0.30Vcc to 0.9 V)
• High-Level Output Voltage (VOH): Varies with Vcc and output current (Vcc - 0.1 V to 2.72 V)
• Low-Level Output Voltage (VOL): Varies with Vcc and output current (0.1 V to 0.44 V)
• Input Leakage Current (II): ±0.1 μA
• Power-Off Leakage Current (IOFF): ±0.2 μA
• Additional Power-Off Leakage Current (ΔIOFF): 0.5 μA
• Supply Current (ICC): 0.9 μA
• Additional Supply Current (ΔICC): 40 μA
• Input Capacitance (CI): 1.0 pF
• Output Capacitance (CO): 1.8 pF

Dynamic Characteristics

• Propagation Delay (tpd): Varies with Vcc and load capacitance (CL)For CL = 5 pF: 1.0 ns to 16.0 nsFor CL = 10 pF: 1.4 ns to 19.8 nsFor CL = 15 pF: 1.6 ns to 23.3 nsFor CL = 30 pF: 2.5 ns to 33.6 ns

Package Outline

• Package Type: VSSOP8 (SOT765-1)
• Dimensions:A max: 0.15 mmA1: 0.85 mmA2: 0.60 mmA3: 0.27 mmbp: 0.23 mmC: 2.1 mmD(1): 2.4 mmE(2): 3.2 mme: 0.5 mmHe: 0.40 mmL: 0.21 mmLp: 0.1 mmQ: 0.4 mmV: 8°W: 0.17 mmy: 0.00 mm

Abbreviations

• CDM: Charged Device Mode
• DUT: Device Under Test
• ESD: ElectroStatic Discharge
• HBM: Human Body Model